Overview
Battery cables are easy to forget until a corroded one leaves you cranking slow at the trailhead. This Big7Kits kit replaces the main battery, ground, alternator and starter cables on the 1995-2004 Toyota Tacoma 1st Gen with labeled, ready-to-install copper cables and adds an external fuse.
Big7Kits recommends 2 gauge for a stock vehicle and 1/0 gauge if you plan to add a winch, lights or other high-draw gear.
Specs
- Brand: Big7Kits
- Type: Battery cable kit
-
Part numbers:
- 2.4/2.7 I4 · 2 Gauge · No Wrap: TTACG1-24-2G
- 2.4/2.7 I4 · 2 Gauge · Black/Red Spyder Wrap: TTACG1-24-2G-RBR
- 2.4/2.7 I4 · 1/0 Gauge · No Wrap: TTACG1-24-0G
- 2.4/2.7 I4 · 1/0 Gauge · Black/Red Spyder Wrap: TTACG1-24-0G-RBR
- 3.4L V6 · 2 Gauge · No Wrap: TTACG1-34-2G
- 3.4L V6 · 2 Gauge · Black/Red Spyder Wrap: TTACG1-34-2G-RBR
- 3.4L V6 · 1/0 Gauge · No Wrap: TTACG1-34-0G
- 3.4L V6 · 1/0 Gauge · Black/Red Spyder Wrap: TTACG1-34-0G-RBR
- Cable gauge: 2 Gauge, 1/0 Gauge
- Conductor: Copper
- Cable colors: Red (positive) and black (ground)
- Wrap option: choose Black/Red Spyder Wrap or no wrap
- Country of origin: USA
- Warranty: Big7Kits Limited Lifetime Warranty (per Big7Kits). Big7Kits states it covers every cable, lug and battery terminal against defects in materials and workmanship for the original purchaser, for as long as they own the vehicle the kit was installed on. Fuses and fuse holders are not covered. Terms and claims are handled by Big7Kits.
-
Fits:
- 1995-2004 Toyota Tacoma
From Big7Kits
This upgraded battery cable kit replaces old worn out battery cables for more power and better performance from your vehicle.
What's the Big 3, and why do you sell a "Big 7"?
The "Big 3" (or sometimes called "Big 4") upgrade means improving the current capacity of three cables: 1) alternator output to battery positive, 2) battery negative to frame/body, and 3) engine ground to frame/body. We don't stop there though. Our "Big 7" kits also include the leads to the starter and the fuse relay box, as well as adding an external fuse to avoid routing the increase in current capacity through the smaller fuse box wiring.
What makes these cables so special?
We're nerds for specs and finer details around here. None of that CCA (copper-clad aluminum) that's used in inferior products, or stereo installations. We only use American-made SAE J1127 fine-stranded oxygen-free copper (OFC) battery cable with EPDM insulation rated 105°C. Then using a powerful electromechanical crimping machine, we crimp each tin-plated copper lug, and finally finish the construction by adding an environmental seal made of marine-grade dual-wall adhesive-lined heat shrink. Also included are made-in-USA military-style (ordnance) lead battery terminals and a MEGA fuse and holder. To make the entire install simpler, every end will be labeled for ease of installation.
Do I need a bigger alternator to run these cables?
No. Every vehicle can benefit from our "better than factory" cables. The years, along with environmental damage from rain/salt water/corrosion, can greatly impact your electrical system. Big7Kits says its customers have consistently reported that their vehicle starts faster, charges the battery better, and many times cured electrical gremlins that were brought on by compromised wiring.
I've changed my mind! I want to run a bigger alternator!
Perfect! You're probably running a power inverter, a stereo, a winch, an under hood welder, or flux capacitor. These all require more amperage than the stock alternator is capable of providing. Maybe you're not running any of these yet, but considering it, these cables will get you ready! An excellent upgrade for Toyota Tacoma owners planning future electrical modifications. These heavy-duty cables help provide the reliable power needed for demanding accessories and off-road equipment.
2GA or 1/0 GA? Which to choose?
As far as 2GA vs 1/0 GA, it's really going to depend on what mods you're going to do to. If you're staying stock, then 2GA is plenty, but if you're looking at modifying it down the road (winches/lights/etc) and want to future proof, then you'd want 1/0 GA.
2/0GA? What's that? That sounds big! Do I need that?
If you like to order the biggest steak on the menu, run 42" Swampers on your stock axles, or like to flex on your friends, these are for you. You probably don't need them, but we've got them for you.
These aren't just any old Tacoma "big 3" cables, these are the "Big 7" from Big7Kits!
Replaces 82122-04041, 82122-04042, 82122-04051, 82122-04052
For some of the Toyota kits there’s only two factory negative cables to replace
Specs
Fitment
- Toyota Tacoma (1995–2004)
Not sure it fits? Call or text (615) 208-3520 with your year, make, model, trim and any lift, and we'll check before you order.
Shipping & returns
Shipping. This item ships LTL freight (by truck): $250 flat per order to the lower 48. Free shipping on $100+ doesn't apply to freight items.
Shipping. Free shipping on orders $100+ (lower 48). Orders under $100 ship for a flat $20. Express shipping is available at checkout.
Returns. Request a return within 14 days of delivery for new, unopened, uninstalled parts. Return shipping and a 20% restocking fee apply (no fee if we sent the wrong item or it arrived damaged or defective).